HPGM-8BP
Short description of the series
The monobloc heat pump is a compact system with a single unit installed outdoors means the available space indoors remains unchanged, it is designed for installation in any type of property, especially homes with limited space. Based on Air to Water heat pump technology, it captures heat energy from the ambient air and transfers it to heat the water that is used to warm your home and supply domestic hot water, it can even cool your home as required. Compared to other technologies, up to 75% of the heat energy required is taken from the ambient air
Control System
The ATW monobloc Heat pump has 3 different kinds of control system to meet the specific requirement of customers.
Wired Controller
Mode control
Weekly timer function
Electric heater
Forced defrosting
Sterilization
Anti-freezing protection
WiFi function
Dry Contact
The heat pump reserves 3 dry contacts as standard and 4 dry contacts as customized, as well as 3 standard output contacts and 3 customized outputs which are 230V output terminals.
Modbus control
The PCB of heat pump outdoor unit has a built-in Modbus control port, so that it can be connected to the third party controllers or computer through Modbus protocol.
Build-in Hydraulic Module
The Monobloc is a fully packaged unit that the indoor and outdoor units are combined as one module. It does not require refrigerant piping work since the Monobloc’s outdoor unit is connected exclusively to water piping. Further, hydronic components such as plate heat exchanger, expansion tank and water pump are included in the package.
Multi Applications In One System
The system can realize heating in winter and cooling in summer, and can produce domestic hot water throughout the year. Various terminal equipment, floor heating, radiators and fan coils can be connected
High Energy Efficiency Performance
The use of advanced components and technologies such as high-pressure ratio DC inverter compressors, DC fan motors, PHE, EXV, etc., the monobloc heat pump system achieves high-efficiency performance in low ambient temperature environment.
R32 Eco Friendly Refrigerant
R32(HFC-32) is a highly environmentally friendly refrigerant, with 0 ODP and 675 GWP, low carbon footprint, no harm to the Ozone. And due to the lower GWP and refrigerant charge volume, R32 helps to protect the environment and preservie HFC quotas by reducing 77% of CO2 emission compared with R410a.
Multi Protections
There are various built-in protection measures to ensure the long-term stable and safe operation of the entire heat pump system.
Current protection
System over-current protection
Voltage protection
System over high voltage protection
System over low voltage protection
Pressure protection
High pressure protection
Low pressure protection
Over-heat protection
Discharged temperature
Condenser coil temperature
IPM over-heat protection
Anti-frozen protection
Water temperature detect
Refrigerant temperature detect
Night Silent Mode
By simple setting on the controller, the heat pump system can be timed to enter night silent mode that reduce noises by 3 dB(A).
| Power supply | 220~240V/1Ph/50Hz |
| Heating power | 8,0 |
| Cooling capacity | 7,0 |
| Max power consumption | 4,4+3,0 kW |
| Max. current consumption | 20+13,6 A |
| Seasonal energy efficiency, SCOP/SEER (A7W35/A35W18) | 4,90/6,80 kW/kW |
| Energy efficiency class | А+++ |
| Coolant temperature (water) | ||
| Heating | 25~62°С | |
| Cooling | 5~25°С | |
| Hot water supply | 25~60°С | |
| Operating temperature mode | -25~50°С |
| Water circulation | ||
| Exit | DN25 mm | |
| Inlet | DN25 mm | |
| Permissible excess operating pressure | 0,3 MPa | |
| Inverter water pump | Yes | |
| Resistance from the water side | 20 kPa | |
| Volume of the expansion tank | 5 L | |
| Evaporator (water volume) | 1,08 L | |
| Refrigerant | ||
| Type | R32 | |
| Loading | 1,6 kg | |
| Throttle type | EXV | |
| Maximum allowable pressure | 4,4 MPa | |
| Reserve electric heater (tubular heater) | ||
| Power supply | 220~240V/1Ph/50Hz | |
| Performance | 3kW | |
| Number of phases | 1 f | |
| Max power consumption | 3kW | |
| Max. current consumption | 13,6A | |
| Noise level | 65 dB(A) |
| Dimensions (H x W x D) | 1335x475x875 mm |
| Packing (H x W x D) | 1420x535x1045 mm |
| Net/gross weight | 119,70/137,5 kg |
